![background image](http://html.mh-extra.com/html/nec/neccare-platinum-express5800-a1160/neccare-platinum-express5800-a1160_installation-manual_251387069.webp)
Verify PCI Card Installation
5-17
14. Select
Update All
and press
Enter
.
An asterisk character appears next to your selection.
15. Select
OK
and press
Enter
.
The EFI flash update starts and progress information is displayed. When the update
completes and the flash memory is verified, a five-second countdown starts, and
then the partition reboots using the new BIOS.
5.5. Verify PCI Card Installation
To verify the correct PCI cards are installed and visible to the system, run PciView from
the EFI BIOS shell on each partition in the system.
Perform the following procedure on each partition in your system to verify the PCI card
installation.
1. Access the partition as described in
5.4.1 Initially Accessing a Partition
.
2. Click
Power Up/Down
on the
Summary
page.
A logo screen appears for a few seconds on the monitor connected to the partition,
with an instruction at the bottom to press the space bar to enter BIOS.
3. Using the monitor and keyboard connected to the partition
a. Press the space bar while the logo screen is displayed.
The BIOS front page appears, as shown in
Figure 5-15
.
Содержание NECCare Platinum Express5800/A1160
