![background image](http://html.mh-extra.com/html/adaptec/snap-server-18000/snap-server-18000_manual_2846896001.webp)
Field Service Documentation
1
Snap Server 18000
Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does
not represent a commitment on the part of Overland Storage or any of its subsidiaries.
Replacing the SATA PCI Controller Card
Replacing the internal controller PCI card may be performed by a single
administrator; no tools are necessary.
Caution
There are static-sensitive electronics inside the unit. Before you handle any
parts, make sure you are working at a static-controlled workstation and that you are
properly grounded.
Taking the Server Offline for Hardware Modifications
Power down the server before you make any repairs.
Improper shutdown may lead to
loss of data or physical harm.
1
To start the shutdown process, press the power
button on the front of the server.
The green power LED remains lit until the shutdown
process is complete.
DO NOT
disconnect the AC
power cord while the LED remains lit.
2
After the power LED is off, disconnect the AC power
cord(s) and all other cables from the back of the
server.
3
The server is heavy. With the help of an assistant, remove the server from the
rack to a clean surface with ample room to the front and rear.
Removing the Rear Cover Plate
1
To release the rear cover plate, turn the locking screw at the rear of the server
counterclockwise until the screw pops loose.
1
2
3
4
5
6
7
8
Locking Screw
Cover Pad
Front Cover Plate
Rear Cover Plate