NEC NEAX 2400 IMX, Руководство пользователя

Страница: 207 / 213

CHAPTER 8 ND-70185 (E)
Page 192
Revision 3.0
EX- FCCS
Data Programming
STEP 5: ARNPL
Assign the access code for LCR/LCRS as assigned in ASPAN associated with the logical routes for
each external trunk assigned in ARTD/ARTDN.
STEP 6: AMND
Assign the Maximum Necessary Digit (MND).
Note 1:
The MND is the total number of ACC + Telephone Number.
Note 2: Refer to CHAPTER 5 , Section 7.1 “ Assignment of Access Code for Tandem Connection via FCCS - ACIS “
for more detail data programming related to LCR/LCRS such as AFRSN, AOPRN, ARNPL and AMND com-
mand.
STEP 7: AEADN
Assign the ADC (Abbreviate Digit Code) for Connection Fusion Group. Enter the FUG Number as-
signed by AFUGN command, TN, and ADC to be assigned.
Note: Check whether the trunk originating call via CCIS can be executed by dialing ACC + Telephone Number
here. Reexamine the assigned numbering plan data if the call cannot be connected. There may be some er-
ror in data setting so far.
4.1.3 To Access EX-FCCS Trunk via EX-FCCS Telephone Number
AELGN: Telephone Numbers must be assigned for all the station within the network uniquely. Use AELGN
command to allocate EX-FCCS Telephone Number. FUG data must be assigned previously by
AFUGN command to activate this command.
Only readout function can be used by this command in case both the Self FUG Number and the Con-
nection FUG Number are assigned, if the Self FUG is not the Center FUG.
Note:
Check whether the trunk originating call via CCIS can be executed by dialing EX-FCCS Telephone Num-
ber. Reexamine the assigned numbering plan data if the call cannot be connected. There may be some error
in data setting.
<NCN of the Center Fusion Group>
Get other manuals https://www.bkmanuals.com