NEC Express5800/R310e-E4, Руководство по обслуживанию

Страница: 24 / 268

4. Maintenance of Express5800/ft series
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
24
Chapter 1 Maintenance
4.
Maintenance of Express5800/ft series
Express5800/ft series (ft server) can be maintained by the following ways:

Using NEC ESMPRO Manager for remote maintenance

Using the ft server utility on the ft server for local maintenance
Tips
To start the ft server utility, select menus as follows:
Start Screen

○
↓

ft server utility
（
Start

All Programs

NEC ESMPRO Agent

ft server utility
）
The table below lists the maintenance way (remote or local) of each feature on the components.
Component
Maintenance
features
General CPU module PCI module
SCSI
enclosure
BMC
Firmware
Start – Remote / Local Remote / Local – –
Stop – Remote / Local Remote / Local – –
View MTBF information – Remote / Local Remote / Local – –
MTBF clear – Remote / Local Remote / Local – –
Diagnosis – Remote / Local Remote / Local – –
Dump collection – Remote / Local – – –
Board switch – Remote / Local – – –
BIOS Update – Remote / Local – – –
F/W update – – – – Local
Quick dump Local – – – –
Auto firmware update Local – – – –
Auto module start Local – – – –
Remote: Executable by using NEC ESMPRO Manager remotely
Local: Executable on local server by using ft server utility
–: Not supported
Tips
The server does not support maintenance feature for the components listed below.

Internal devices
SCSI adapter under PCI module
Ethernet board under PCI module
Network port of Ethernet board under PCI module
SCSI enclosure and SCSI slots under the enclosure

Optional devices
Important

Consult with your maintenance personnel to use the maintenance features.

Perform the following steps before replacing component.
1. Clear MTBF information of relevant component.
2. Stop the relevant CPU module and PCI module.