8. Troubleshooting
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
103
Chapter 1 Maintenance
If the tree or the state is not be displayed correctly when you open
Information of server
state/constitution
immediately after the startup, wait for at least 20 minutes, and then open
Information of server state/constitution
again.
Flash FDD information
After turning on/off the POWER switch of CPU/IO module, the flash FDD name of
I/O Device
in
Information of server state/constitution
may be different from the name that is recognized by
the OS.
Check the Flash FDD name on the browser such as Explorer.
If Flash FDD is added or removed while the system is running, the result is reflected to
I/O
Device
in
Information of server state/constitution
at the next system startup.
Display when the PCI module (IO module) is running in the simplex mode.
When only the PCI modules (IO modules) is running in the simplex mode (non-duplexed mode),
the
Information of server state/constitution
cannot display the status of the
SCSI Enclosure
and
Mirror Disk
correctly. To check if the duplex mode is changed to the simplex mode, check
the event log or AlertViewer log, or the status color of the PCI module by the
Information of
server state/constitution
.
SCSI status while PCI module is starting or being stopped.
While the PCI module is starting or being stopped, the status of
SCSI Enclosure
,
SCSI Slot
,
and
Mirror Disk
in
Information of server state/constitution
becomes unstable, and incorrect
status is displayed temporarily.
Display of an unmounted sensor
An unmounted sensor is indicated as "Unknown" on
Information of server state/constitution
.
For example:
Information of server state/constitution
-
Enclosure
-
Temperature
Temperature information
Location: DIMM2
Temp#0
Temperature: Unknown
Threshold: Disabled
Status: Unknown
Содержание Express5800/R310e-E4
Страница 267: ...MEMO...
