NEC Express5800/R120b-1, Руководство пользователя

Страница: 402 / 580

9-46 Upgrading Your Server
Removal
To remove the CPU, prepare the removal referring to steps 1 and 4 in the installation procedure and
do the reverse procedure of steps 12 to 7.
IMPORTANT:
„
Do not remove any CPU unless it is failed.
„
After the operation, heat may make the cool seat at the bottom of the heat sink
adhere to the CPU. To remove the heat sink from the CPU, first turn the heat sink
to the left and right lightly to make sure that the heat sink can be apart from the
CPU. Removing the heat sink with it adhering to the CPU might cause the CPU
and/or socket to fail.
Do the following procedure if a CPU is removed (or replaced).
1.
When a CPU is replaced, select [Advanced]
→
[Processor Configuration]
→
[Processor
Information] to confirm that the CPU ID, L2 Cache RAM, and L3 Cache RAM of the
additional CPU are defined normally (described on page 4-11).