Configuring Your System 3-21
Clearing and Changing the Passwords
To clear and change the passwords:
1.
Power off the system and remove the front bezel and top cover as described
in Chapter 4 of this guide. Remove the power cord from the server.
2.
Remove the spare jumper from position 11 - 12 on jumper block.
3.
Reinstall the spare jumper on position 3 - 4 (Password Disable) of the
jumper block. Refer to the previous illustration “System Board Jumpers” to
find the location of this jumper.
4.
Connect the power cord, power on the system and while waiting for POST
to complete, press the F2 key to enter BIOS setup. This automatically clears
all passwords, provided you exit and save the BIOS setup.
5.
Power off the system and remove the power cord.
6.
Remove the Password Disable jumper from pins 3-4 and store it in position
11 - 12.
7.
Replace the top cover, connect the power cord and power on the system.
8.
Install the front bezel.
9.
To specify a new password run the BIOS Setup Utility as described earlier
in this chapter.
Clearing CMOS
Clear CMOS as follows.
1.
Power off the system and remove the front bezel and top cover as described
in Chapter 4 of this guide. Remove the power cord from the server.
2.
Remove the spare jumper from position 11 - 12 on jumper block.
3.
Reinstall the spare jumper on position 1 - 2 (CMOS Clear) of the jumper
block. Refer to the previous illustration “System Board Jumpers” to find the
location of this jumper.
4.
Connect the power cord, power on the system and after POST completes,
power down the system and unplug the power cord.
5.
Remove the jumper from pins 1-2 and store the jumper on pins 11-12.
6.
Replace the top cover, connect the power cord and power on the system.
7.
Install the front bezel.
8.
Press
F2
at the prompt to run the BIOS Setup utility, and select “Get Default
Values” at the Exit menu.
Содержание Express5800/120Rc-2
