NEC Express5800/120Mc2 series, Руководство пользователя

Страница: 43 / 172

Setting Up the System 2-11
Rear View
This figure shows the location of the following rear system features and
controls.
A – USB2 connector Second USB connector (black)
B – USB1 connector
First USB connector (black)
C – COM2 port COM2 serial port 9-pin connector (turquoise)
D
– COM1 port COM1 serial port 9-pin connector (turquoise)
E – Printer port Parallel port 25-pin connector (burgundy)
F – Keyboard port
PS/2-compatible 6-pin mini-DIN connector (purple)
G – Mouse port PS/2-compatible 6-pin mini-DIN connector .(green)
H – SVGA connector SVGA monitor 15-pin connector (blue)
I – LAN connector RJ-45 Ethernet connector.
J – DC Power fault
(amber light)
See Table "Power Supply Status Indicator LEDs (Rear Panel)"
that follows
K – Power supply status
(green light)
See Table "Power Supply Status Indicator LEDs (Rear Panel)"
that follows
L – Line voltage selector switch Selects AC input power of 115 VAC or 230 VAC.
M – AC input power connector
Supplies AC power to the power supply.
N – 64 bit, 66 MHz PCI slots Two PCI-66 MHz/64 bit add-in board slot locations.
O – 64 bit, 33 MHz PCI slot
One PCI-33 MHz/64 bit add-in board slot location.
P – 32 bit, 33 MHz PCI slots Three PCI-33MHz/32 bit add-in board slot locations.
Q – Combo PCI/ISA slot
One shared PCI or ISA add-in board slot location.
Rear Features and Controls