NEC Express5800/120Eg, Руководство пользователя, Страница: 69 / 332

Chapter 4
Configuring Your Server
Configuration and setup utilities are used to change your system configuration. You can configure
your system, as well as option boards you may add to your system, using the BIOS SETUP Utility.
Several unique system parameters are configured using the BIOS SETUP, which is stored in the
system FLASH memory.
If your system has been factory configured, the BIOS SETUP Utility do not need to be run unless
you want to change the password or security features, add certain types of option boards or devices,
or upgrade your system board.
This chapter also provides information on several system configuration parameters that are set by
jumpers on the system board. However, these parameters do not usually require change.
SYSTEM BIOS (SETUP)
The SETUP utility is provided to make basic hardware configuration for the server. This utility is
pre-installed in the flash memory of the server and ready to run.
The server is configured with the correct parameters using the SETUP utility and shipped in the best
conditions. Thus, you don't need to use the SETUP utility in most cases. However, you might
wish to use the SETUP utility in the cases described below.
IMPORTANT:
„
The SETUP utility is intended for system administrator use only.
„
The SETUP utility allows you to set a password. The server is
provided with two levels of password: Administrator and User.
With the Administrator password, you can view and change all
system parameters of the SETUP utility. With the User password,
system parameters available for viewing and changing are limited.
„
Do not set any password before installing the OS.
„
The server contains the latest version of the SETUP utility. Dialog
boxes appear on your SETUP utility, thus, may differ from
descriptions in this manual. If you find anything unclear, see the
online help or ask your sales agent.