NEC Express 5800/320Lc, Руководство пользователя

Страница: 137 / 365

System Configuration 4-5
Configuration Examples
The following describes examples of configuration required to use software-link features or for
system operations.
Link with Management Software
To control power supply of the server with NEC ESMPRO Manager via the network
Select [System Hardware]
→
[AC-LINK]
→
[StayOff].
To use the management PC with "NEC MWA" installed for remote operations
Remote operation via LAN
Select [Advanced]
→
[Advanced]
→
[RomPilot Support]
→
[Enabled].
Remote operation via direct connection using cross cable
Select [System Hardware]
→
[Console Redirection]
→
[Console Connection]
→
[Direct].
Remote operation via WAN
Select [System Hardware]
→
[Console Redirection]
→
[Console Connection]
→
[Via Modem].
UPS
To link power supply with the UPS
To power on the server when power is supplied from the UPS
Select [System Hardware]
→
[AC-LINK]
→
[Power On].
To keep the server off-powered even when power is supplied from the UPS if the POWER
switch was used to power off
Select [System Hardware]
→
[AC-LINK]
→
[Last State].
To keep the server off-powered even when power is supplied from the UPS
Select [System Hardware]
→
[AC-LINK]
→
[StayOff].
Keyboard
To set NumLock and key repeat
Select [Advanced]
→
[Keyboard Features] and set each item.