NEC Express 5800/320Lc, Руководство пользователя

Страница: 156 / 365

4-24 System Configuration
Console Redirection
Select "Console Redirection" on the System Hardware menu and press
Enter
to display the
following screen.
Serial Port Address:
Baud Rate:
Flow Control:
Console Connection:
If enabled, the console
will be redirected to
this port.
Item Specific Help Console Redirection
[Disabled]
[19.2K]
[XON/XOFF]
[Direct]
System Hardware
Phoenix BIOS Setup Utility
F1 Help -/+ Change Values F9 Setup Defaults
F10 Save Changes & Exit Sub-Menu Enter Select Esc Exit
Select Item
Select Menu
See the table below for setup options on the screen.
Option Parameter Description Your Setting
Serial Port
Address [Disabled]
On-board COM B Select a serial port to connect the HW
console.
Selecting "On-board COM B" changes
"Boot-time Diagnostic Screen" to
"Enabled".
Baud Rate [19.2K]
57.6K
Select a baud rate for communications
with the connected HW console.
Flow Control [None]
XON/XOFF Select a flow control method.
Console
Connection [Direct]
Via modem Select a connection with the HW console.
[ ]: Factory-set