NEC Express 5800/320Lc, Руководство пользователя

Страница: 44 / 365

2-10 General Description
Notes on Operations and Manipulations
Do not power off the switch while starting the server.
After powering on the server, do not power it off during the startup.
→
There is a possibility that it will not start up properly when you try to start the
server next time. Do not shut it down until the OS is started and the duplication
process is completed.
Do not use the keyboard or mouse right after startup.
Do not use the keyboard or mouse right after startup.
→
POST will not be completed. Details are described in “POST fails to complete:” of
“Problems with NEC Express5800/ft series” of “SOLVING PROBLEMS” in
Chapter 7 “Troubleshooting” in this User’s Guide. See “
□ Did you perform any
keyboard or mouse operation immediately after you started the server?”
Do not start NEC Express5800/ft series while BMC status LED on the secondary side
is blinking.
Do not start NEC Express5800/ft series while the BMC status LEDs are blinking.
→
Mirror of the hard disk drives is cancelled when the server is started. For details,
see “Primary PCI module’s status LED2 and DISK ACCESS LED illuminate
amber after startup:” of “Problems with NEC Express5800/ft series” of
“SOLVING PROBLEMS” in Chapter 7 “Troubleshooting” in this User’s Guide.