2. SYSTEM BIOS –SETUP–
Express5800/R320c-E4, R320c-M4 User's Guide
80
Chapter 3 Setup
2.4
Cases that Require Configuration
Only if a case applies to any of following cases, use the SETUP utility to change a parameter which was
configured as factory setting. Other than cases described below, do not change the settings. A list of SETUP
parameters and factory settings are described in
Chapter 3 (1. System BIOS) in "Maintenance Guide".
Category
Description
To be changed
Remark
Change date and time
Main
System
Date
Main
System
Time
Configurable on OS
On/Off NumLock at power ON
Boot
Bootup
Numlock
ON
Basic
Hide the logo during POST
Boot
Quite
Boot
Disabled
Pressing the <Esc> key
hide the logo tentatively.
Option
board
Enable Option ROM Scan of
installed option board
Advanced
PCI
Configuration
PCI
Slot X Option ROM
Enabled
X is PCI slot number of the
option board
Change the boot order of
devices
Boot
Boot
Option
Priorities
Change the boot priority
When you use
EXPRESSBUILDER, set
CD/DVD to the highest
priority.
Boot
Use remote wake-up function
(via LAN)
Advanced
Advanced Chipset
Control
Wake On LAN/PME
Enabled
Set a password
Security
Administrator Password
Enter a password
Security
User Password
Enter a
password
If password is set, a
message to require
password is displayed at
next time SETUP is
launched.
Security
Restrict bootup by entering
password
Security
Password on Boot
Enabled
Can be selected when
password is set.
When the server is supplied
with power from UPS, always
turn on the power.
Server
AC-LINK
Power On
If the server is turned off by
using POWER switch, leave it
OFF even when UPS supplies
power.
Server
AC-LINK
Last State
UPS
Power link
Keep the power OFF even
when UPS supplies power.
Server
AC-LINK
Stay off
