2. Installation and Connection
Express5800/R320c-E4, R320c-M4 User's Guide
63
Chapter 2 Preparation
Do not install the tower conversion kit in such places as listed below. Otherwise, the server may malfunction.
Narrow space from which devices cannot be pulled out from the tower conversion kit completely
Place that cannot bear the total weights of the devices mounted on tower conversion kit
Place where stabilizers cannot be installed or where the tower conversion kit can be installed only after the
practice of proper earthquake-resistant construction
Place of uneven or slanting floor
Place where temperatures change widely (near a heater, air conditioner, or refrigerator).
Place that is subject to intense vibration.
Place where corrosive gas (sodium chloride, sulfur dioxide, hydrogen sulfide, nitrogen dioxide, or ozone) is
generated, or a place that is close to chemicals or exposed to chemicals.
Place where chemicals may be accidentally sprayed over
Place whose floor is covered with non-antistatic carpet.
Place that may be subject to falling objects.
Place that is close to some equipment that generates intense magnetic field (e.g., TV set, radio,
broadcasting/communications antenna, power transmission wire, and electromagnetic crane). (If
unavoidable, contact your sales agent to request proper shield construction.)
Place where the power cord of the server must be connected to an AC outlet that shares the outlet of
another device with large power consumption.
Place that is close to some equipment that causes power noises (e.g., sparks caused by power-on/off using
a relay). If you must install the server close to such equipment, request your sales agent for separate power
cabling or noise filter installation.
Environment
where
operation
of the server is not guaranteed
When you have selected a site, carry the tower conversion kit to the site, then place it slowly and gently.
Important Do not hold the tower conversion kit by its front door to lift the it. The front door may
be disengaged and damage the device.
After placing the tower conversion kit, lock its two rear wheels out of four.
