manualshive.com logo in svg

NEC EXP320P, Руководство пользователя, Страница: 55 / 89

Поделиться
Скачать
NEC EXP320P Скачать руководство пользователя страница 55

2. Installation and Connection

 

 

 

Express5800/R320c-E4, R320c-M4  User's Guide 

55

 

 

Chapter 2 Preparation 

2.2.2 

 Installing the server to the rack 

Mount the server to the rack. 

 

WARNING

 

 

 

 

   

   

Be sure to observe the following precautions to use the server safety. Failure to 

observe the precautions may cause death or serious injury. For details, refer to 

Safety precautions in Precautions for Use. 

 

 

Do not use any racks out of standards. 

 

Use only under the specified environment. 

 

 

 

 

CAUTION

 

 

 

 

 

   

Be sure to observe the following precautions to use the server safely. Failure to 

observe the precautions may cause burns, injury, and property damage. For 

details, refer to Safety precautions in Precautions for Use. 

 

Do not drop the server. 

 

4U chassis weighs about 10 kgs. At least two persons are required to install 

it. 

 

CPU/IO module weighs about 18 kgs. At least two persons are required to 

install it. 

 

Do not leave the CPU/IO module of the server being pulled out. 

 

Do not install the CPU/IO module with its cover removed. 

 

Do not get your fingers caught. 

 

 

 

Important  Temperature increases and airflow in the rack 

 

If multiple devices are installed, or if the inside of the rack is not sufficiently 

ventilated, the internal temperature rises due to the heat emitted from each 

device, which may result in a malfunction. Review airflow in the rack and 

room and take sufficient measures so that the internal temperature will not 

exceed the operational temperature during operation.   

Air enters the server from the front and exits from the rear. 

 

Содержание EXP320P


























































































Отзывы:

Нет отзывов