NDD easyone pro, Руководство оператора, Страница: 51 / 188

EasyOne Pro™ / EasyOne Pro™ LAB 51
Performing a Test
Adding a Spirometry Trial
If you would like to add trials to a previous test, e.g. if the patient needed a
break or if other patients were tested in between, please proceed as fol-
lows. Remember, however, that it is only possible to add a trial to a previous
test that was performed on the same day.

Select the patient.

Click Perform Test .

Select the test, e.g. FVC .
A menu will appear.

Click Add Trial or Add Post .
The acquisition screen will be displayed.

Perform the new spirometry maneuvers.
FVL Test (inspiratory and expiratory measurement)
Ambient Conditions
The ATPS values ( A mbient T emperature P ressure S aturated = spirometer
conditions) of inspiratory measurements must be converted to BTPS values
(
B ody T emperature P ressure S aturated = body conditions). For this conver-
sion, the system needs the following data:

relative humidity

room temperature

atmospheric pressure or altitude.
Before the inspiratory test can be started, a window pops up with these
data. Check the data. For the pending test you can now edit the data, if nec-
essary, or confirm them, if they are correct.
Fig. 3-13 Menu