NDD easyone pro Скачать руководство пользователя страница 25

Страница: 25 / 188

EasyOne Pro™ / EasyOne Pro™ LAB

Start-up and Initial Preparation



Attach the valve unit to the sensor (aligning the arrow) and advance the
valve unit until you hear it click into place (press button

to unlock).

Note

The valve unit must be mounted on the sensor only for DLCO
and FRC tests. All other tests are performed without the valve
unit.



Pull out the sensor holder on the left side of the device (

, Fig. 2-1) and

place the sensor in the holder.

If you are working with the sensor stand (optional accessory), you can posi-
tion the sensor such that the patient is not required to hold it during the
tests.



Using the clamp, screw the sensor stand to the table top.



Open the catch and insert the sensor.



Close the catch.

Fig. 2-7

Attaching the valve unit to the sensor

Fig. 2-8

Inserting the sensor in its stand

Содержание easyone pro





























































































































































































Результаты поиска

Содержание easyone pro

Отзывы:

NDD easyone pro, Руководство оператора, Страница: 25 / 188

Результаты поиска

Содержание easyone pro

Отзывы: