Nautel NV30LT-N, Руководство по эксплуатации и техническому обслуживанию

Страница: 23 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.4 VERSION 0.1 2015-03-01
User Interface Options
The user can interface with the NV30LT-N using one of three methods:
 Locally, using the front panel display, its navigational buttons (see Front Panel UI ) and the RF On, RF
Off and Local/Remote control push-buttons (see Front Panel Pushbuttons, on page 3.2.10 ).
 Remotely, via a LAN connection, using the advanced user interface (AUI) pages (see Advanced User
Interface (AUI), on page 3.2.15 ).
 Remotely, via remote input/output (I/O) wiring connected to the controller (A4) or the optional
remote interface PWB (A16) (see the NV30LT-N Pre-installation Manual for I/O details).
See the complete menu hierarchy illustrated in Figure 3.2.1 and Figure 3.2.2 (for the local front panel
menu) and Figure 3.2.3 (for the remote AUI menu). When a user interfacing function can be performed
from both the front panel display and the remote AUI, both are described in this section.
Front Panel UI
The front panel UI is 4 x 20 character graphic LCD display (see Figure 3.2.5 on page 3.2.9 ). The UI can be
controlled by its adjacent keypad. The UI contains a menu-based series of pages that serve specific
functions. Similar interfacing, as well as more advanced functionality, is available on the remotely
accessed AUI (see
Front Panel UI Screens, on page 3.2.11 ).
LCD Display
This display shows all the UI screens. The display’s top level screen, used for viewing purposes only, is
shown in
Figure 3.2.1 .
Figure 3.2.1: Top Level Screens
Press ‘up’ or ‘down’ button to
toggle between these two
screens. Upper screen
shows frequency and power
setpoint. Lower screen
shows PA V (PA voltage)
and I (total PA current).
Press ‘checkmark’ button to
go to Main Menu screen
(see
Figure 3.2.5 on page
3.2.9
).