Nautel NV30LT-N, Руководство по эксплуатации и техническому обслуживанию

Страница: 114 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.96 VERSION 0.1 2015-03-01
3. Enter the following parameters:
 Email Server : The outgoing mail server. Enter the server name or IP address here. In order to
enter a server name (e.g., mail.nautel.com), at least one nameserver IP address must be
entered (see
Network Setup, on page 3.2.90 ).
 Port Number : This logical connection end point uses a number to identify the type of process
to which an internet or other network message is to be forwarded to when it arrives at a
server. Typically, this is set to 25 for unencrypted SMTP systems and 843 for encrypted email.
 Transmitter Name : Set to a name that associates to the transmitter such as station
identification (e.g., NV10LT_WXYZ). This name will be included in notification emails.
 Sender Email Address : Enter as a standard email address (e.g., a@b.com). This will be the
sender address that notification email recipients will see. Free web-based email service
accounts (Gmail, Hotmail, Yahoo mail etc.) are acceptable here.
 Authentication Required : If your email server requires authentication to send emails, select
the check box and enter the appropriate Username and Password to allow this. If the check
box is not selected, the Username and Password fields do not appear.
 Username : Enter the username for your outgoing email server.
 Password : Enter the password for your outgoing email server.
NOTE
: The transmitter will automatically handle encryption if the associated mail server requires it.
4. When complete, select Apply or Cancel to restore the previous setting. Use the Test button to
enter an address to which an email will be sent to verify your settings. Enter the recipient address
and click the
OK button to send the test email or click the Cancel button to return to the Email
Configuration page.