Nautel NV30LT-N, Руководство по эксплуатации и техническому обслуживанию

Страница: 35 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.1 2015-03-01 PAGE 3.2.17
The bottom banner is also permanent on all AUI pages and includes:
 RF On : Click to enable the transmitter’s RF power stage.
 RF Off : Click to disable the transmitter’s RF power stage.
 Activity Window : Displays various messages to reflect specific user interface commands, such as
RF on/off, local/remote control, or reset.
 Menu : Click to open the Menu page, which allows navigation to various other pages (see Menu
Page on page 3.2.21 ).
 Status : Click to shortcut to the Transmitter Status page (see Viewing Transmitter Status - AUI on
page 3.2.87 ), which provides current alarm and status details for the transmitter. When the Status
button is red, one or more alarms of “high” severity is currently being reported and the transmitter
is in an ‘off-air’ state. When the
Status button is amber, “medium” or yellow “low” one or more
lower level alarms is currently being reported, but the transmitter is still ‘on-air’, possibly at
reduced power. When the
Status button is green, the transmitter is operating normally. In this case
there are no alarms being reported. This page is also available through the Menu page.
 Logs : Click to shortcut to the Transmitter Log page, which displays historical alarm and status
records for the transmitter (see Viewing Transmitter Log on page 3.2.23 ).
 Local/Remote : Displays the operational control status of the transmitter. From the touch screen,
press the desired button. If Local is highlighted green, only local control of the AUI is possible. If
both Local and Remote are highlighted green, both local and remote controls are enabled.
 Reset : Press to reset protection circuits and restore any RF power modules (and associated power
supplies) that were inhibited, but are now alarm-free. Resets protection circuits that have latched
off the transmitter. To initiate an alarm reset from the front panel display, see
Resetting Alarms, on
page 3.2.86 .
 Log Out : Click to log out of the AUI session and return to the login menu. To log in again, use your
remote PC’s keyboard to enter your Username and Password, then click the Submit button. If you
do not have a user account, see User Accounts, on page 3.2.121 .
The displays between the top and bottom menus, contains user selected pages. These pages provide
access to a variety of AUI functions such as transmitter status and hardware settings. The following
paragraphs describe how to use these pages.