manualshive.com logo in svg

Nautel NV30LT-N, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Nautel NV30LT-N Скачать руководство пользователя страница 57

NV30LT-N OPERATIONS & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

VERSION 0.1  2015-03-01

PAGE 3.2.39

Figure 3.2.26: EQ Impulse Response

EQ Impulse Response

See 

Figure 3.2.26

. This panel displays the impulse response of the modulator’s EQ filter in the time 

domain. This is a static display tool so the screen image is not fluid and will not change.

Click on the panel to display a cursor in the approximate area. The cursor position (time and magnitude) 
is noted in the upper, right-hand corner of the panel. Click in other areas of the panel to provide a 
coarse adjustment of the cursor position.

Use the left and right buttons to make fine adjustments to the cursor position.

Use the up or down button to maximize (if it was minimized) or minimize (if it was maximized) the 
panel size.

Time Unit is us
(microseconds)

Содержание NV30LT-N



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды