X
GEM-P1632 Programming Instructions
L
NAPCO Security Systems
!
Page 28
!
1. Select the desired option by circling
"
the data values for each digit (left and right).
!
2. Add the data values (ex: F=15=(1+2+4+8) from the selected options. See page 23).
!
3. Enter in address location (left and right digits).
NOTE:
Dark shaded data value box shows option not available.
!
4. Press
U
or
D
to save.
[Default = blank (•) blank (•)]
SYSTEM OPTIONS (ADDRESS 1060, 1061 & 1062)
LEFT DIGIT (SUM
OF DATA VALUES)
RIGHT DIGIT (SUM
OF DATA VALUES)
ADDRESS 1060
S
ys
tem
Op
tio
n
s
LUG E15 OUTPUT MODE:
Select the options available from the table above.
!
1. Enter in right digit only (left digit is not used).
!
2. Valid entries are “blank (•)” or “1”.
!
3. Press
U
or
D
to save.
SYSTEM OPTIONS
LEFT DATA
VALUES
(CIRCLE
"
)
RESERVED
1
RESERVED
2
Disable System Trouble
Audible Timeout
4
RESERVED
8
RIGHT DATA
VALUES
(CIRCLE
"
)
SYSTEM OPTIONS
1
Enable Keypad Set
Time/Date Message
2
Enable Cancel Report
to Telco 3
4
Disable [ON/OFF] as Easy
Exit
8
Enable
GEM-PRINT Module
Lug E15
Output Mode
ADDRESS 1061
LEFT
RIGHT
blank (•)
blank (•)
[Default = blank (•) blank (•)]
blank (•)
1
Armed
Armed Away
Lug E15 Output Mode
LEFT
RIGHT
OPTION
blank (•) blank (•)
Armed
blank (•)
1
Armed Area 1
Away
DATA ENTRIES
!
1. Select the desired option by circling
"
the data values for each digit (left and right).
!
2. Add the data values (ex: F=15=(1+2+4+8) from the selected options. See page 23).
!
3. Enter in address location (left and right digits).
NOTE:
Dark shaded data value box shows option not available.
!
4. Press
U
or
D
to save.
[Default = blank (•) blank (•)]
LEFT DIGIT (SUM
OF DATA VALUES)
RIGHT DIGIT (SUM
OF DATA VALUES)
ADDRESS 1062
SYSTEM OPTIONS
LEFT DATA
VALUES
(CIRCLE
"
)
Digital Dialer Rpt Enter/
Exit Test Mode
1
Disable Call Waiting
on 1st Attempt
2
RESERVED
4
RESERVED
8
RIGHT DATA
VALUES
(CIRCLE
"
)
SYSTEM OPTIONS
1
Exit Time Restart
2
Sound Alarm on Exit Error
4
Rpt Exit Err/Recent Close
8
Enable CP-01 Limits
