NAPCO Gemini GEM-P1632, Инструкция по программированию

Страница: 25 / 52

L
NAPCO Security Systems
X
GEM-P1632 Programming Instructions
!
Page 25
SYSTEM OUTPUT TIMEOUTS (ADDRESS 0710, 0712, 0713 & 0714)
!
1. Select delay/timeout (0-255 min.) from the table shown.
!
2. Enter in corresponding address locations above (left and right digits).
!
3. For a desired delay/timeout not listed do the following:
A. Choose a desired delay/timeout, ex: 20 min.
B. Divide it by 16
!
4. Press
U
or
D
to save.
OUTPUT TIMEOUTS: If a timeout of “0 min.” is selected, then the output will remain active (ON)
until the system is reset or disarmed. For UL Residential Installations, the minimum timeout is 4
minutes. Not UL listed for Commercial Installations.
1 Quotient Left Digit
16 20
16
4 Remainder Right Digit
DOWNLOAD/CALLBACK OPTIONS (ADDRESS 1183 & 0236-0255)
NUMBER OF RINGS BEFORE PICKUP: Enter the number of rings before automatic pickup by the
control panel when downloading from a computer (see Glossary at the back for more information).
!
1. Enter in right digit only (left digit is not used).
!
2. Valid entries are: 3-9, 0 = 10, B = 11, C = 12, D = 13, E = 14, F = 15
NOTE: Default is 15 Rings. Dark shaded data shows option not available.
!
3. Press
U
or
D
to save.
CALLBACK TELEPHONE NUMBER: Enter telephone number to be used when downloading from a computer (see Glossary at the
back for more information).
!
1. Enter in right digit only (left digit is not used).
!
2. Enter up to 20 digits from left to right. NOTE: Leave trailing boxes blank (•). For a zero, press G0 .
!
3. Valid entries are: 1-9, B =
*
button, C =
#
button, D = 3 sec. pause, E = Wait for dial tone, F = ignore location.
!
4. Press
U
or
D
to save.
PAGER FORMAT OPTIONS (ADDRESS 0256 & 0257)
LEADING DIGITS FOR PAGER FORMAT: In Pager Format reporting, the message typically begins with “00”.
However, for some pager services, this will cause the Pager's Voice Mail feature to activate. This option allows you
to program these digits to any number desired. A typical Pager report is “003 22 1234”, where 3 is the Event, 22 is
the zone, and 1234 is the Subscriber ID number. For example, if the Leading Digits are programmed as “98”, the
Pager report will now appear as “983 22 1234”.
NOTE: See CS Receiver Options to select Pager Format.
!
1. Enter in 1st and 2nd Leading Digits in right digit only (left digit is not used) as shown.
!
2. Valid entries are: 0-9.
!
3. Press
U
or
D
to save.
S
ys
tem
Ou
tp
u
t T
im
eou
ts, Dow
n
lo
ad/Callback &
Page
r Opti
ons
CALLBACK
ADDRESS 0236-0255 (RIGHT DIGITS 1-20)
Telephone 0236 0237 0238 0239 0240 0241 0242 0243 0244 0245 0246 0247 0248 0249 0250 0251 0252 0253 0254 0255
Telephone R R R R R R R R R R R R R R R R R R R R
(Digits 1-20)
[Default = blank (•) for all digits 1-20]
No. Rings
ADDRESS 1183
Before
LEFT RIGHT
Pickup blank (•)
[Default = blank (•) blank (•)]
PGM2
ADDRESS 0710
Output
LEFT RIGHT
Timeout (min.)
[Default = blank (•) blank (•)]
Alarm
ADDRESS 0712
Output
LEFT RIGHT
Timeout (min.)
[Default = 15 mins. = (blank) F]
Pulse Alarm
ADDRESS 0713
Output
LEFT RIGHT
Timeout (min.)
[Default = 15 mins. = (blank) F]
PGM1
ADDRESS 0714
Output
LEFT RIGHT
Timeout (min.)
[Default = blank (•) blank (•)]
DATA ENTRIES DELAY/
LEFT RIGHT TIMEOUT
blank (•) blank (•) 0 min.
blank (•) 1 1 min.
blank (•) 2 2 min.
blank (•) 3 3 min.
blank (•) 4 4 min.
blank (•) 5 5 min.
blank (•) 6 6 min.
1 blank (•) 16 min.
F F 255 min.
Leading Digits for
Pager Format
LEFT RIGHT
(1st Digit) blank (•)
ADDRESS 0256
Leading Digits for
ADDRESS 0257
Pager Format
LEFT RIGHT
(2nd Digit) blank (•)
[Default = blank (•) blank (•)]