background image

© by N&W GLOBAL VENDING S.p.A. 

40

 

11 2008 3275 00 

PrOgrAmmiNg mENu SummArY

The machine can work in 3 different operation states

:

- Normal operation mode;
- Filler menu;
- Technician menu.

to be able to access the programming menus, press the 

programming button 

 (see fig. 29):

now, the machine is set to the Filler Menu mode.

press the key 

 to move from the "technician Menu" to 

the "Filler Menu" and vice versa

NAVigATiON mODE

to move inside the menus, use the keys shown by the 

figure

:

s

crolliNg

 

KEys

 

up

 

 

aND

 

DowN

 

press the 

 and 

 scrolling keys to move from one item 

to the other one of the programming menus on the same 

level and to change the enable status and the numeric 

value of the functions.

c

oNfirmatioN

 / 

ENtEr

 

KEy

 

Press the confirmation / Enter key 

� 

to move to the 

lower level or to confirm a data item you have just en

-

tered or modified

.

E

xit

 

KEy

 

press the exit key 

� 

to move back to the upper level or 

to quit a field intended to modify a function. After hav

-

ing reached the highest Menu level, press this key once 

again to move from the technician Menu to the Filler 

menu and viceversa. 

E

NtEriNg

 

alpHaNumEric

 

valuEs

When the management software requires the operator 

to enter alphanumeric characters, keys assume the 

following functions:

the enter key 

 -

 will enable the operator to modify / 

enter the first character, to confirm it and to move to the 

next one.
the keys 

 -

 and 

 will enable the operator to scroll all 

available values.

E

NtEriNg

 

passworDs

passwords are 5-digit numeric codes.

When the management software requires the operator to 

enter a password, use the keys 

 and 

Fig. 36

1- 

 previous function

2- 

 next function

3- 

 confirm

4- 

 delete

5- 

 direct price programming

Содержание Diesis 500





























































Отзывы: