N&W Global Vending Diesis 500, Установка, эксплуатация и обслуживание

Страница: 37 / 60

© by N&W GLOBAL VENDING S.p.A.
31
11 2008 3275 00
m
ENu maNagEmENt
passworD
It is a 5-digit numeric code you are required to enter to
display all "advanced" functions.
to enter the password, press the scroll keys
�
and
�
.
the value of this code is set to 00000 by default.
rEDucED
/
complEtE mENu ENablE
to enable the request for password function in order to
display all "advanced" functions of the technician Menu
as soon as you access the programming mode. the
request for password is disabled by default.
s
ElEctioNs
From this group you can set up the parameters of
selections:
m
otor paramEtErs
You can set up the parameters required to handle the
motors of the columns:
Motor Time Out (default 30 sec) -
DelayMotorStart (default 0 msec) if set up other than 0, -
a check is performed at the motor start: if the input of
the corresponding cam is detected after a time equal to
the value you have set up, the motor error is set up (a
motor jam is suspected).
DelayMotorStop (default 0 msec) if set up other than
-
0, it represents the delay value of the motor stop after
having reached the dispensing cam.
virtual pricE rEturN
Use this function if you do not wish to cash the price
of the second selection if the second dispensing cycle
of a virtual selection should fail (only if MDB payment
systems or validators are in use). For the other payment
systems, you can establish whether to return the whole
amount or not.
rotatioN sElEctioNs
Use this function to create 3 groups of several columns
that are activated by rotation to increase the autonomy of
the same product and to make dispensing uniform.
the columns grouped in a single selection must be
adjacent.
all the selections belonging to the same group must
have the same price.
proDuct coDE
Use this function to assign every single spiral a 4-digit
identification code to process statistics.
E
NErgy saviNg
this function is disabled by default. Use it to stop selling
at well-defined time intervals.
2 time bands for service interruption can be programmed
for every day of the week.
The days of the week are identified by a progressive
number (1= Monday, 2= Tuesday, ...)
For example, if you wish to set up the "energy saving"
time bands to dispense products from 7.00 a.m. to 10.00
p.m. during the days of the week and to inhibit the sale
on saturdays and on sundays, set up the time bands
according to the table.
Day 1 2 3 4 5 6 7
Band 1
start 00.00 00.00 00.00 00.00 00.00 00.00 00.00
end 07.00 07.00 07.00 07.00 07.00 23.59 23.59
Band 2
start 22.00 22.00 22.00 22.00 22.00 00.00 00.00
end 23.59 23.59 23.59 23.59 23.59 00.00 00.00
When "energy saving" time band has tripped, the lamps
remain on and the display shows the "out of service"
message.
m
acHiNE NEoN lamp out of sErvicE
You can define whether to turn on or off the illumination
of aesthetic panels when the machine is out of service or
the "energy saving" time band has tripped.
m
astEr
/
slavE
the control system of the machine is arranged for bank
connection with other automatic vending machines by
using special kits.
this will enable the operator to use one single payment
system for several machines.
In case of a bank installation, the machine can be config -
ured as a "Master", i.e. it will keep the second machine
under control, or as a "slave", i.e. the second machine
will keep it under control.
even if you can use the machine in the master and slave
function, it is recommended to use the snack machine
as a master to make use of the central keyboard and to
open the doors more easily.
the master/slave function is not enabled by default.
To enable it, define the master machine and the slave
machine in the software of the master machine and in
the software of the slave machine.
Use this functionality to set up a bank of machines, if
available.