N&W Global Vending Diesis 500, Установка, эксплуатация и обслуживание

Страница: 10 / 60

© by N&W GLOBAL VENDING S.p.A.
4
11 2008 3275 00
TECHNiCAL FEATurES
Sizes 480 650
A mm 750 985
B mm 883 883
C mm 1830 1830
D mm 920 1155
E mm 1325 1630
Weight kg 279 328
rating plate (Diesis 500 / 700)
supply voltage V~ 230
supply frequency Hz 50
absorbed power 740
Door lamp V ~ 230
Door lamp W 2x36
m
aximum opEratioN coNDitioNs
:
room temperature c° 34 -
relative humidity % 65 -
c
ooliNg systEm
Ventilated evaporator -
programmable defrost cycle -
compressor refrigerating capacity W 560 -
* If the room temperature is +34°c, the condensation
temperature is +50°c and the evaporation temperature
is -10°c.
p
aymENt systEm
the machine is arranged for the systems with executive
or MDB or BDV protocol and parallel validators.
s
alEs pricEs
You can set a different sales price for every single selec -
tion.
c
oiN box
You can also mount a cover and a lock.
D
ispENsablE proDucts
the machine can be arranged to sell:
- bottles between 62 and 73 mm in diameter and be-
tween 234 and 280 mm in height in single row;
- bottles between 62 and 73 mm in diameter and be-
tween 196 and 233 mm in height in double row;
- cans 66 mm in diameter and above 116 mm in height in
triple row.
- cans 66 mm in diameter and below 116 mm in height in
quadruple row.
the "setup table" attached to the documentation is
intended to specify the optimal setup the manufacturer
has directly arranged for some of the most common
types of bottles.
You must find out the best calibration of the dispensing
device for other types of bottle.
Very irregular or not very compact bottles might be un-
suitable for vending.
c
oNtrols aND safEty DEvicEs
"working" signal -
"exact amount" signal (with suitable coin mechanisms) -
"full column" microswitch on every single selection -
Door switch -
sales motor switch -
Maximum sales motor supply time -
Heat protection of sales motors -
compressor heat protection -
line fuses -
Fuses on the primary and secondary transformer. -
Fig. 3