N&W Global Vending Colibri UL 120V, Инструкция по использованию и установке

Страница: 35 / 52

Programming menu summary
The machine can function in 3 different operating modes:
- Normal vending mode
- Maintenance Menu
- Programming menu
In order to access the programming menus, press the pro-
gramming button located on the inside of the door.
The buttons shown in the figure are used for surfing
through the different menus:
Fig. 31
1 - Programming access button
© by N&W GLOBAL VENDING S.p.A.
31
02-2007 266 00
Fig. 32
When pressing the programming button, the machine goes
into “Maintenance menu” mode.
SCROLLING BUTTONS UP ( ) AND DOWN ( )
The UP and DOWN scrolling buttons are used for moving
from one programming menu item to the next one, located
in the same level, and at the same time change the status
or the numeric value of the corresponding functions.
CONFIRM / ENTER BUTTON ( )
The confirm / enter button is used for moving to the lower
level or for confirming a value after being entered or
changed.
EXIT BUTTON ( )
The exit button is used for returning to the higher level or
for exiting a change field of a function. When reaching the
highest level in the menu, this button is pressed for going
from the Programming menu into the Maintenance menu
and vice versa.
INSERTING THE VALUES
When the control software requests the entry of letters
and/or numbers the buttons take on the following func-
tions:
The confirm button “ ” is for changing / entering the first
character, then for confirming it and going to the next char-
acter.
The “ ” and “ ” buttons are for scrolling through the avail-
able values.
After entering the values, press the confirm button “ ” and
the display will show the message “Confirm?”; press again
the confirm button to store the values.