NAiS GT10, Техническое руководство

Страница: 136 / 195

GT10/GT30 6.3 Entering Configuration Settings from the GT30
113
When either of the above keys is touched, a confirmation message reading
is displayed. To clear the data, touch the key. When
is displayed, the memory has been completely cleared.
SHORTCUTS
[RETURN]To complete the settings and return to the previous screen,
touch the [ESC] key.
CAUTION
[SRAM] initialization deletes the clock data and Hold PLC Device
data backed up in the SRAM. Please be sure that you want to do
this before initializing the SRAM.
[FROM] initialization deletes the base screen data and the main unit
configuration setting data (the main unit configuration setting data
returns to the default values) in the user memory (F–ROM) of the
main unit. Before initializing the F–ROM, always save screen data to
a floppy disk or another medium with GTWIN.
6.3.7 Test Mode: “Self–Diagnosis”
The self–diagnosis is run from the initial screen of the system menu. This is used to run
a hardware check of the memory, buzzers, and other elements of the GT30.
Touch SW & DIP SW
This runs an operation check of the touch switches and the DIP switches.
Backlight & Buzzer
This runs an operation check of the backlight and the buzzer.
LCD
This displays a pattern and runs an operation check of the display.
Contrast
Touch the [+] and [–] keys to check changes in the contrast.
SHORTCUTS
[RETURN]To exit the system menu and return to the normal operation
mode, touch the [ESC] key.
EXPLANATION
Test Menu items
A dot [
•
] is displayed to the left of the key switch for items on the
Test Menu which have already been tested.