NAiS GT10, Техническое руководство

Страница: 117 / 195

GT10/GT30 6.1 GT30 Configuration Settings
94
6.1 GT30 Configuration Settings
Before using the GT30 for the first time, it must be set up by entering the GT30
configuration settings indicated below. Always check and enter the settings under
“Basic communication area to PLC”. For instructions on setting up the GT30, see page
37.
6.1.1 Two Types of GT30 Configuration Settings
1. Entering configuration settings from GTWIN screen creation tool page 95 .
With this method, GT30 configuration settings are entered from GTWIN screen creation
tool, and the GT30 configuration file is sent to the GT30. Most items can be set using
this method.
GTWIN GT30
GT30
configuration
file sent
2. Entering configuration settings from the GT30 main unit page 108 . . . . . . . . .
Some of the settings, such as the communication parameters, the internal clock, and
adjustments of the liquid crystal display contrast, can be set using the system menu of
the GT30. Settings are entered using the touch switches on the front of the panel.
GT30
EXPLANATION
Items in the GT30 Configuration Settings
Items that can be set from GTWIN
Items that can be set
either way Items that can be set from the
GT30 system menu
Title setting Communication parameters Clock division setting for the internal clock
Type of PLC connected LCD contrast setting
Basic communication area to PLC Communication parameters
Communication parameters Memory initialization
Auto–paging screen settings Self–diagnosis
Startup screen (default screen) settings
Reference destination setting for clock
Backlight control
Touch sounds
Hold PLC device
GT internal device hold