NAiS GT10, Техническое руководство

Страница: 98 / 195

GT10/GT30 5.2 Entering Configuration Settings with GTWIN
75
·
Bit area ––– This specifies the type of device that reads and writes backlight
control and other bit information, and the initial address.
The type of device and addresses can be set by clicking on the buttons for the
various items.
Device settings dialog box
Clicking on the button displays a pull–down
menu. Select the device for which settings are
to be entered, and use the ten–keys to enter
addresses.
The button functions as a backspace
key when entering addresses.
The button acts as a Clear key.
REFERENCE
For detailed information on the basic communication area map, see
“GT10 Basic Communication Area Map” on page 30.
EXPLANATION
Standard settings
Clicking on the button in the “GT Configuration” dialog box displays the
following message. Clicking on [OK] sets the default values (the configuration settings
entered when the unit is shipped) for all of the settings.
For information on the contents of configuration settings entered when the unit is
shipped, see “Contents of configuration settings for GT10 when shipped from the
factory” on page 26.
5.2.3 GT Configuration Settings: “Communication Parameters”
Clicking on the “Communication Parameters” tab in the “GT Configuration” dialog box
displays the following screen.