© Ernst Nagel GmbH 2S Trimmer Service Manual en.doc Rev.1.0. 20.07.2011
85
Contents
6. Default / basic adjustments
(continued)
6.1 Replacing Knives
(continued)
6.1.6 Adjustment Upper Knife
Fig. 6.8
Fig. 6.9
Adjusting
No. Action
Remarks
1
Check if the space [J] between the Upper Knife and the Marked
Screws [R] is 0.50mm
Use a feeler gauge 0.50mm.
(See Fig. 6.7)
2
Adjust the space if necessary with Screws [O]
Never adjust Screws [R] (See
Fig. 6.8)
3
Turn Screws [E] two times (90º) clockwise each.
(See Fig. 6.7)
4
Place the Knife Safety Plate [B] or Trim Waste Fan back by using
Allen Screws [A] with washers.
(See Fig. 6.2)
5
Turn the Upper Knife down in the lowest position using by turning
Crank [P] with a 13mm Wrench.
(See Fig. 6.9)
O
R
P
