iii
Rev. 10-7-16
Part #C-00140
GT20 Control Wiring and Programming Manual
WARNING LABELS
Warning labels are universal and used to alert an individual of potential harm to one’s self or to others. The following warning
labels are listed in a hierarchy order that defines the most potential danger first, and the least potential danger last. Please refer
to this page in the event that a warning label is displayed within this manual and further definition needs to be explained.
Indicates potentially dangerous situations. Danger is used when there is a hazardous
situation where there is a
high
probability of severe injury or death. It should not be
considered for property damage unless personal injury risk is present.
Indicates a hazardous situation which has
some
probability of severe injury. It should
not be considered for property damage unless personal injury risk is present.
Indicates a hazardous situation which
may result in a minor injury
. Caution should not
be used when there is a possibility of serious injury. Caution should not be considered
for property damage accidents unless a personal injury risk is present.
Attention: A situation where material could be damaged or the function impaired.
Notice: Indicates a statement of company policy as the message relates to the personal safety or
protection of property. Notice should not be used when there is a hazardous situation or
personal risk.
Note: Indicates important information that provides further instruction.
GENERAL SAFETY RECOMMENDATIONS
According UL 325 8.4, Do Not mount Operator onto flammable surfaces!
Read this “General Safety Recommendations” section before installing, operating or
servicing the automatic door. Failure to follow these practices may result in serious
consequences. If you do not understand the instruction, ask the installing qualified
technician to teach you how to use the door.
Do not install, operate or service this product unless you have read and understand
the General Safety Recommendations, Warning Labels, Installation and Operating
Instructions contained in this manual. Failure to do so may result in bodily injury, or
property damage.
If the door appears broken or does not seem to work correctly, it should be
immediately removed from service until repairs can be carried out or a qualified
service technician is contacted for corrective action.
The GT20 Swing Door Operator Assembly must not be mounted within locations
presenting explosion hazards. The presence of flammable gases or smoke represents a
considerable safety hazard.
DANGER
WARNING
CAUTION
DANGER
WARNING
WARNING
WARNING
WARNING
Содержание GT20
Страница 2: ...THIS PAGE IS INTENTIONALLY LEFT BLANK...