15
All rights reserved ©N1 Critical Technologies, Inc.
NE Series (20-30kVA)
User Manual
Chapter 3 Installation
Tool
Appearance
Description
Claw hammer
Beat, install, and disassemble component.
Impact drill, drill
Drilling
PVC insulation tape
Used to insulate wires and conductors.
Cotton cloth
Used to clean panels and shells.
Brush
Clean the panel and shell.
Heat shrink tubing (
Φ
14
、
Φ
18
、
Φ
20
、
Φ
25
）
Used to insulate wires and conductors.
Heat gun
Used to heat a heat shrink tubing.
Electrician's knife
Used to strip cables.
Protective gloves
Used to protect hands and the device on
which you operate.
ESD gloves
Used to prevent the electrostatic discharge
(ESD) from damaging a board or other
electrostatic sensitive devices (ESSDs) when
you insert or remove a board or hold
an ESSD.
Insulated gloves
Used to insulate hands.
