MYERS Illuminator Supernova Series, Руководство по установке

Страница: 91 / 131

90
115895B System Installation Manual
SERIAL TO ETHERNET ADAPTER OPTION SECTION
Do not forget to stop capture after data is transferred.
Press Enter when ready...
***********< TEST LOGS >***********
1/75 MONTHLY
09/20/19 17:43
DURATION : 5 MIN
FAULTS : 0
VOUT : 125.3
IOUT : 7.5
TEMP : 33.5 deg C
: : : :
75/75 MONTHLY
03/15/14 08:30
DURATION : 5 MIN
FAULTS : 0
VOUT : 126.2
IOUT : 6.4
TEMP : 26.3 deg C
CMD>
These log each of the times that the inverter ran self-test (which tests the battery and inverter
operation
– the primary goal is to make sure that the battery does not yet need to be replaced).
Again, there is space for up to 75 logs. The first line of a log entry will indicate whether the self-
test was an automated monthly self-test (
MONTHLY
), or an automated yearly self-test (
YEARLY
). The
rest of the entry will tell you the timestamp of the self-test, the duration of the test (in minutes),
whether or not faults were detected, the output voltage (in Volts) and current (in Amps) of the
inverter during the test, and the ambient internal temperature inside the cabinet (in degrees
Celsius).
Finally, the event log (which also has up to 75 entries) will store the results of manually evoked
self-test events (
EVENT
). The entries will have the exact same format as the test log, but instead of
MONTHLY or YEARLY , it will say EVENT .