Muratec MFX-C4000 Скачать руководство пользователя страница 192

Страница: 192 / 280

Alignment & Troubleshooting

Service Manual

4-86

Problem Description

Cause Description

Action to Resolve

Auger Marks (thick

slanted white band)

1. Low Toner

Concentration

2. Developer Loss

[1. Low Toner Concentration]

1.1) In case of Low Toner Concetration.

1.2) Check the T/C control value [TM #111-0006~0017]. If there

is any problem, change the value.

1.3) After operate Main , Black OPC/DEVE, Color OPC,

Color Deve BLDC Motor [EDC #100-0000], [EDC #100-

0002],[EDC #100-0004],[EDC #100-0006], operate the

toner supply motor for 10 sec [EDC #111-0000~0003].

Check the printed image.

1.4) If the problem is improved by toner supply, change the T/C

control value to raise the T/C [TM #111-0006~0017].

[2. Developer Loss]

2.1) The problem occurs because of the low toner.

2.2) Check the abnormal developing condition was occured by

the defective environmantal sensor.

2.3) Check the Charge Bias TM #105-0010~0016] and Deve

Bias [TM #106-0000~0003]. If there is any wrong value,

change the value.

2.4) Check the Charge Bias [EDC #105-0000~003]. If it is

defective, replace the HVPS.

2.5) Check the Deve Bias[EDC #106-0000~003]. If it is

defective, replace the HVPS.

2.6) If Charge bias and HVPS are normal, replace the

developing unit.

Carriers on Printed

Image

1. High OPC Surface

Potential

[1. High OPC Surface Potential]

1.1) The problems occurs because of abnormal charge/deve

conditions.

1.2) Check the environmental sensor.

1.3) Check the Charge Bias TM #105-0010~0016] and Deve

Bias [TM #106-0000~0003]. If there is any wrong value,

change the value.

1.4) Check the Charge Bias [EDC #105-0000~003]. If it is

defective, replace the HVPS.

1.5) Check the Deve Bias[EDC #106-0000~003]. If it is

defective, replace the HVPS.

Содержание MFX-C4000

























































































































































































































































































Результаты поиска

Содержание MFX-C4000

Отзывы:

Muratec MFX-C4000, Руководство по полевой инженерии, Страница: 192 / 280

Результаты поиска

Содержание MFX-C4000

Отзывы: