Muratec MFX-C4000 Скачать руководство пользователя страница 185

Страница: 185 / 280

Alignment & Troubleshooting

Service Manual

4-79

Problem Description

Cause Description

Action to Resolve

Vertical Irregular

Image Density for All

Colors

1. Unbalanced T2

Transfer

[1. Unbalanced T2 Transfer]

1.1) Check the THV value.[EDC #107-0005] If there is any

wrong value, replace the HVPS

1.2) Check the T2 Engage/Disenage Motoer[EDC #100-0010].

If it is defective, replace the T2 Engage Motor.

1.3) Check the T2 Engage/Disenage sensor [#EDC #100-0011].

If it is defective, replace the sensor.

1.4) When checking T2 Engage/Disenage [#EDC #100-0010],

check that the T2 Roller work or not. If not work, replace

the T2 Unit.

1.5) Check the ITB Drive Roller Ground. If it is defective, replace

the ITB.

Image Density

Difference between

Right and Left Sides

for a Particular Color

1. Unbalanced T1

Transfer Roller Nip

[1. Unbalanced T1 Transfer Roller Nip]

1.1) Check that the Front Cover is locking properly.

1.2) Take out the ITB and check the T1 roller state. If it is

defective, replace the ITB.

Image Density

Difference between

Right and Left Sides

for All Colors

1. Unbalanced T2

Transfer Roller Nip

[1. Unbalanced T2 Transfer Roller Nip]

1.1) Check that the Side Cover is locking properly.

1.2) Check the T2 Engage/Disenage Motoer[EDC #100-0010].

If it is defective, replace the T2 Engage Motor.

1.3) Check the T2 Engage/Disenage sensor [#EDC #100-0011].

If it is defective, replace the sensor.

1.4) When checking T2 Engage/Disenage [#EDC #100-0010],

check that the T2 Roller work or not. If not work, replace

the T2 Unit.

1.5) Check the ITB Drive Roller Ground. If it is defective, replace

the ITB.

Horizontal White

Line(s)

1. Mis-Contact on T1

and/or Charging

Bias

2. Electrostatic Noise

[1. Mis-Contact on T1 and/or Charging Bias]

1.1) Take out the ITB and check the T1 roller conditions. If it is

defective, replace the ITB.

1.2) Check and confirm MHV Bias for the color [TM #105-

0010~0016]. If there is any wrong value, change the value

[TM #105-0010~0016].

1.3) Turn on the Charging Bias for the color [EDC #105-

0000~0003]

1.4) Read the MHV value for the color [EDC #105-0004~0007]
1.5) If any mis-reading on the MHV value, replace HVPS-L PBA.

1.6) Check the OPC grounding. If the grounding is defective,

replace the Imaging unit.

1.7) Check the ITB grounding. If the grounding is defective,

replace the ITB unit.

Содержание MFX-C4000

























































































































































































































































































Результаты поиска

Содержание MFX-C4000

Отзывы:

Muratec MFX-C4000, Руководство по полевой инженерии, Страница: 185 / 280

Результаты поиска

Содержание MFX-C4000

Отзывы: