Muratec MFX-3550, Руководство пользователя

Страница: 78 / 213

flaps and strips might cause wrinkling, creasing, or jams, and may even damage the fuser.
z
For the best print quality, position margins no closer than 15 mm from the edges of the
envelope.
z
Avoid printing over the area where the envelope’s seams meet.
Transparency
To avoid damaging the machine, use only transparencies designed for use in laser printers.
z
Transparencies used in the machine must be able to withstand machine’s fusing temperature.
z
Place them on a flat surface after removing them from the machine.
z
Do not leave unused transparencies in the paper tray for long periods of time. Dust and dirt may
accumulate on them, resulting in spotty printing.
z
To avoid smudging caused by fingerprints, handle them carefully.
z
To avoid fading, do not expose printed transparencies to prolonged sunlight.
z
Ensure that transparencies are not wrinkled, curled, or have any torn edges.
z
Do not use transparencies that separates from the backing sheet.
z
To prevent transparencies from sticking to each other, do not let the printed sheets stack up as
they are begin printed out.
z
Recommended media: Transparency for a color laser printer by Xerox, such as 3R 91331(A4), 3R
2780(Letter)
Labels
To avoid damaging the machine, use only labels designed for use in laser machines.
z
When selecting labels, consider the following factors:
{
Adhesives: The adhesive material should be stable at your machine’s fusing temperature.
Check your machine’s specification to view the fusing temperature. (See General
specifications .)
{
Arrangement: Only use labels with no exposed backing between them. Labels can peel off
sheets that have spaces between the labels, causing serious jams.
{
Curl: Prior to printing, labels must lie flat with no more than 13 mm of curl in any direction.
Page 11 of 14 Media and tray
8/4/2009 http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/...
77