Muratec MFX-3550, Руководство пользователя, Страница: 184 / 213

Enter Again You entered an unavailable item. Enter the correct item again.
File Format isNot
Supported
The selected file format is not
supported. Use the correct file format.
Fuser error There is a problem in the machine. Turn the machine off and turn it on
again. If the problem persists, call
for service.
Group
NotAvailable You have tried to select a group location
number where only a single location
number can be used, such as when
adding locations for a multiple send
operation. Use a speed dial number or dial
number manually using the
number keypad.
IP Conflict
This IP address
conflicts with
that of other
system
The IP address is used elsewhere. Check the IP address or obtain a
new IP address.
Jam bottom of
duplex
Paper has jammed during duplex
printing. Clear the jam. (See In the duplex
unit area .)
Jam in exit area Paper has jammed in exit area. Clear the jam. (See In exit area .)
Jam inside
Machine Paper has jammed inside the machine. Clear the jam. (See Inside the
machine .)
Jam top of
duplex Paper has jammed during duplex
printing. Clear the jam. (See In the duplex
unit area .)
Junk Fax Error
Junk FaxJob
Cancelled
The machine has received a fax from
which is registered as a junk fax. The received fax data will be
deleted.Reconfirm junk fax setup.
(See
Receiving .)
Line Busy
The line is
already engaged.
Try later
The receiving fax machine did not
answer or the line is already engaged. Try again after a few minutes.
Line Error
The Fax Line has
a problem.
Try again
Your machine cannot connect with the
receiving fax machine or has lost
contact because of a problem with the
phone line. Try again. If the problem persists,
wait an hour or so for the line to
clear again. Or, turn the ECM
mode on (See
Sending .)
Mail Size Error
Mail exceeds
thanserver
support
The mail size is larger than the
supported size by SMTP server. Divide your mail or reduce the
resolution.
Mail Size Error
One Page isToo
Large
Single page data exceeds the configured
mail size. Reduce the resolution and try
again.
Memory Full
Cancel | Start
The memory is full. Press the left/right arrow to
highlight
Cancel or Start , then
press OK . If you select Cancel ,
the machine stops the fax job. If
you select
Start , the machine only
sends scanned documents of the
fax job.
Memory Full
Divide the Job
The memory is full. Split the transmission into more
than one operation.
Memory Full
Fax memory is
full. Print or
The memory is full. Print or remove the received fax
data in the memory.
Page 12 of 27 Troubleshooting
8/4/2009 http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/t...
183