REGULATORY COMPLIANCE STATEMENTS
Wireless Guidance
Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices),
operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. The
following section is a general overview of considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in the specific country
sections (or country group sections). The wireless devices in your system are only qualified for use
in the countries identified by the Radio Approval Marks on the system rating label. If the country you
will be using the wireless device in, is not listed, contact your local Radio Approval agency for
requirements. Wireless devices are closely regulated and use may not be allowed.
The power output of the wireless device or devices that may be embedded in your printer is well
below the RF exposure limits as known at this time. Because the wireless devices (which may be
embedded into your printer) emit less energy than is allowed in radio frequency safety standards
and recommendations, manufacturer believes these devices are safe for use. Regardless of the
power levels, care should be taken to minimize human contact during normal operation.
As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body,
for use of a wireless device near the body (this does not include extremities) is typical. This device
should be used more than 20 cm (8 inches) from the body when wireless devices are on and
transmitting.
This transmitter must not be collocated or operation in conjunction with any other antenna or
transmitter.
Some circumstances require restrictions on wireless devices. Examples of common restrictions are
listed below:
Radio frequency wireless communication can interfere with equipment on commercial aircraft.
Current aviation regulations require wireless devices to be turned off while traveling in an
airplane. IEEE 802.11 (also known as wireless Ethernet) and Bluetooth communication devices
are examples of devices that provide wireless communication.
In environments where the risk of interference to other devices or services is harmful or
perceived as harmful, the option to use a wireless device may be restricted or eliminated.
Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples
where use of wireless devices may be restricted or eliminated. When in environments where you
are uncertain of the sanction to use wireless devices, ask the applicable authority for
authorization prior to use or turning on the wireless device.
Every country has different restrictions on the use of wireless devices. Since your system is
equipped with a wireless device, when traveling between countries with your system, check with
the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a
wireless device in the destination country.
If your system came equipped with an internal embedded wireless device, do not operate the
wireless device unless all covers and shields are in place and the system is fully assembled.
Wireless devices are not user serviceable. Do not modify them in any way. Modification to a
wireless device will void the authorization to use it. Contact manufacturer for service.
Only use drivers approved for the country in which the device will be used. See the
Page 8 of 12
Regulatory information
8/4/2009
http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/...
13
Содержание MFX-3550
Страница 1: ...Muratec MFX 3550 User Guide English...
