Chapter 4 – Device Configuration
34
MultiConnect AW User Guide
an end of connection or to receive a clear indication of the end
of a connection from the TCP/IP stack.
DLE Mode 1 is enabled, the [ETX] characters means a request or
an indication of end of connection. As a consequence, [ETX]
characters that belong to the payload must be sent by the host
on the serial port preceded by a DLE character. Similarly, ETX
characters received by the TCP/IP stack from the Internet are
sent to the host through the serial port preceded by a DLE
character.
Q) TCP TxDelay
100
milliseconds
This option determines the time delay introduced before
sending a TCP frame that has not been entirely filled with user
data. The time is entered in milliseconds, and it should be noted
that a value of 0 initiates the sending of a TCP frame as soon as
possible after the reception of a single character value from the
host.
R) Handshake TimeOut
(sec)
90 seconds
The handshake timeout is a wireless modem timeout of
between 1 and 255 seconds. Default is 90 seconds.
S) SIM Pin Code
Not Required
The default option (1) is the SIM pin code is not required.
Option 2 is enter or change the pin code. The pin code is four to
eight digit number.
Note: After 3 unsuccessful attempts to enter the PIN, the PUK
(Personal Unblocking Key) will be required.
Z) Enter Wireless Modem
Command Mode
This option opens the command port on the wireless modem to
enter AT commands.
