Chapter 1 – Product Description and Specifications
MultiConnect AW User Guide
11
Front Panel
The front panel displays three Signal Strength LEDs, a Carrier Detect LED, a Link Status LED, and a Power LED.
Signal Strength LEDs display the internal wireless device signal level when they are on; when they flash, a failure
has occurred. Refer to Chapter 7 for a description of the flashing Signal Strength LEDs.
●
The Carrier Detect LED works for both analog and wireless. When solidly ON, both connections are
established.
●
The Link Status LED lights when the unit is registering with the network and blinks when the unit is registered
with the network.
●
The Power LED lights when power is supplied to the unit.
●
The SIM door on the right side provides access to the SIM card holder.
MT200A2W-G and MT200A2W-H5
MT200A2W-C1
LEDs
LED Indicators
Signal
ALL OFF - Unit is off, not registered on network, or extremely weak signal (RSSI <7).
1 Bar “ON” – Very weak signal (7 < = RSSI < =14)
1 Bar and 2 Bar “ON” – Weak signal (15 < = RSSI < =23)
1 Bar, 2 Bar, and 3 Bar “ON” – Good signal ( 24<= RSSI < = 31)
CD
CD
– Carrier Detect – The Carrier Detect LED has three states.
Slow Blink – Waiting for wireless connection.
Fast Blink – After the wireless connection, a fast blink indicates waiting for analog connection.
Solid Blink – Both sides are connected.
LS
LS
– Link Status – Link Status is ON when the unit is registering with the network and blinks
when the unit is registered with the network.
Lights when DC power is applied to unit.
Package Contents
●
1 MultiConnect Converter
●
1 antenna
●
1 RJ-11 cable
