Chapter 4 – Device Configuration
MultiConnect AW User Guide
37
J) View or change Phone
Number/IP Conversion Table
This option allows for additional connections to be added to
the Phone Number/ IP Conversion Table.
When a dialed number matches one of those in this table,
the default Remote Port and IP options are overridden
during the call. If the entry does not match, the default is
used. For detailed instructions on entering data in this table,
refer to View or Change Phone Number/IP Conversion Table
in this chapter.
MultiConnect AW Security
Option
Default
Selection
R) Handshake TimeOut (sec)
90 seconds
The handshake timeout is a wireless modem timeout of
between 1 and 255 seconds. Default is 90 seconds.
Z) Enter Wireless Modem
Command Mode
This option opens the command port on the wireless
modem to enter AT commands.
View or Change Phone Number/IP Conversion Table
The Phone number/IP conversion table uses an analog (PSTN) phone number to look up a remote server’s IP
address. Phone number/IP conversion table holds up to 5 entries. When a dialed number matches a number in
the table, the default Report Port and Remote IP are overridden for this call.
To set up the conversion table:
1.
If you are still on the Main Menu, enter J to go to the Phone number/IP Conversion Table.
2.
Enter number for the entry you want to change.
3.
Enter a Server Port Number.
4.
Enter the Server Phone Number without dashes between the area code, exchange, and extension number.
5.
For Server IP, enter the IP address of the server on your cellular network.
6.
You do not have to enter + to save these changes.
Analog (PSTN) Port Configuration
The default settings in the Analog (PSTN) Port Configuration are typically the correct ones.
