Chapter 3 – Configuring Ports
MultiConnect AW User Guide
27
GPRS Port Options
GPRS Network Dependent
Option
Default
Description
B) Protocol
TCPClient
Select either TCPClient, Telnet, UDP, or PassThru
C) Inbound or Outbound
Outbound only No selection.
D) Wireless Connection
On Demand
Select either On Demand or Always On.
Note:
If you want Always On, do not select this option until you finish
making other configuration changes.
Port Dependent
Option
Default
Description
Note:
When you change the Remote Port or Remote IP, they become the default without pressing the + key to
save the configuration.
F) Remote Port
1
TCP/IP port that remote device is listening on.
G) Remote IP
None
IP address of remote device on the network you are connecting
to.
Wireless Band
Option
Default
Description
Note:
The Wireless Band is set depending on the region of the world the unit is set up for, e.g., 850/1900MHz for
NAM.
K) Wireless Band
Dual-band 850-
1900 MHz
This option is default depending on the region of the world the
unit is set up for, e.g., 900/1800MHz for Europe.
0) dual-band 850/1900 MHz
1) dual-band 900/1800 MHz
APN Dependent
Option
Default
Description
Note:
Configure options L thru N based on your Access Point Name (APN) Server requirements.
L) APN User Name
The user name may not be required by all network providers.
M) APN Password
The password may not be required by all network providers.
N) APN Server
The APN assigned by your cellular network provider.
MultiConnect AW Security
Option
Default
Description
Note:
If required by wireless provider, enter SIM pin code.
S) SIM Pin Code
Not required
If enabled, select option 2 and enter your pin code. The pin code
is four to eight digit number.
Note:
After 3 unsuccessful attempts to enter the PIN, the PUK
(Personal Unblocking Key) is required.
GSM Cellular Port Configuration
1.
Enter 1 for Cellular Port. GPRS is the default.
