manualshive.com logo in svg

Multitech MT1932ZDX, Краткое руководство пользователя

Поделиться
Скачать
Multitech MT1932ZDX Скачать руководство пользователя страница 81

81

Appendix C - Service, Warranty and Tech Support

About the Internet

Multi-Tech is a commercial provider on the Internet, and we retrieve
e-mail messages from the following mailboxes on a periodic basis:

[email protected]

Marketing Dept.

[email protected]

Sales Dept.

[email protected]

International Marketing & Sales

[email protected]

Publications Dept.

If you prefer to receive service via the internet, you can 

Contact Tech

Support via E-mail

.

Multi-Tech's presence includes a Web site at:

http://www.multitech.com

and an ftp site at:

ftp://ftp.multitech.com 

About the Multi-Tech Fax-Back Service

Multi-Tech's fax-back system provides 24-hour access to sales, marketing,
and technical literature for customers in the U.S.A. Dial (612) 717-5888,
follow the voice prompts, and enter the document number for either the
Sales and Marketing catalog or the Technical Support catalog of documents.
For convenience, write your fax number in the following space:
__________________________________________.

From the Sales and Marketing catalog, you can request to have newsletters,
white papers, press releases, brochures, and other marketing literature
faxed to you. From the the Technical Support catalog, you can request
basic modem operation information and troubleshooting guides. With
either catalog, simply enter the FB Doc. number of the literature you wish
to receive.

Содержание MT1932ZDX



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды