manualshive.com logo in svg

Multitech MT1932ZDX, Краткое руководство пользователя

Поделиться
Скачать
Multitech MT1932ZDX Скачать руководство пользователя страница 2

Quick Reference Guide

P/N 82027808 Revision I (12/15/97)

MT1932ZDX, MT1932ZDXI, MT1932ZDXK, MT1932ZDX-Mac

This publication may not be reproduced, in whole or in part, without prior expressed
written permission from Multi-Tech Systems, Inc. All rights reserved.

Copyright ©1997, by Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties with respect to the
contents hereof and specifically disclaims any implied warranties of merchantability or
fitness for any particular purpose.  Furthermore, Multi-Tech Systems, Inc. reserves the
right to revise this publication and to make changes from time to time in the content
hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organiza-
tion of such revisions or changes.

Record of Revisions

Revision

Description

I

Manual revised to reflect editorial changes.  All pages at

(12/15/97)

Revision I.

Trademarks

Trademarks of Multi-Tech Systems, Inc. are as follows:

MultiModem, MultiModem II, MultiModemZDX, MultiModemµ, MultiExpress,
MultiExpressFax, Multi-Tech, and the Multi-Tech logo.

IBM is a trademark of International Business Machines Corporation.
Macintosh is a registered trademark of Apple Computer, Inc.
MNP, Microcom Network Protocol, is a trademark of Microcom, Inc.
ProComm Plus is a registered trademark of Datastorm Technologies, Inc.
Windows is a registered trademark of Microsoft in the U.S. and other countries.

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, MN 55112 U.S.A

(612) 785-3500 or (800) 328-9717

Fax  (612) 785-9874

Fax-Back  (612) 717-5888

Technical Support  (800) 972-2439

BBS  (612) 785-3702 or (800) 392-2432

Internet  

http://www.multitech.com

Tech Writer: [email protected]

Содержание MT1932ZDX



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды