manualshive.com logo in svg

Multitech MT1932ZDX, Краткое руководство пользователя

Поделиться
Скачать
Multitech MT1932ZDX Скачать руководство пользователя страница 66

66

MT1932ZDX Quick Reference Guide

NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Plug the equipment into an outlet on a circuit different from that
to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for
help.

WARNING: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.

FAX WARNING: The Telephone Consumer Protection Act of 1991 makes
it unlawful for any person to use a computer or other electronic device to
send any message via a telephone fax machine unless such message
clearly contains in a margin at the top or bottom of each page or the first
page of the transmission, the date and time it is sent and an identification
of the business or other entity, or other individual sending the message and
the telephone number of the sending machine or such business, other
entity, or individual.

See your fax software manual for setup details.

Содержание MT1932ZDX



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды