manualshive.com logo in svg

Multitech MT1932ZDX, Краткое руководство пользователя

Поделиться
Скачать
Multitech MT1932ZDX Скачать руководство пользователя страница 13

13

Chapter 2 - Quick Start

Step 3: Install the Modem in Windows 95

If you are using Windows 95, you must install the modem in the operating
system. (If you are using another operating system, you may skip this
step.)

Adding the MT1932ZDX to Windows 95

1.

Click the Start button, point to Settings, and click Control Panel.

2.

Double-click the Modems icon. If no modem is currently installed, the
Install New Modem wizard appears. If a modem is already installed,
the Modems Properties sheet appears; click Add to go to the Install
New Modem wizard.

3.

Click Next in the Install New Modem wizard. Windows searches for
your new modem and asks you to verify its selection.

Note:  If Windows cannot find a modem, your modem may be turned
off, it may be plugged into the wrong connector on your computer, or
the serial cable may be faulty. See “None of the LEDs Light When the
Modem Is Turned On” and “The Modem Does Not Respond to
Commands” in Chapter 5, “Troubleshooting Your Fax Modem.”

4.

If Windows identifies your modem correctly as a MultiTech MultiModem
or a MultiModem MT1932ZDX, click Next to install the modem. After
the modem is installed, click Finish to exit.

5.

If Windows cannot identify your modem (for instance, if it identifies
your modem as a “Standard Modem”), click Change. A dialog box with
a list of manufacturers and a list of modems appears.

6.

Select “MultiTech Systems” from the Manufacturers list box, then
select “MultiModem MT1932ZDX” from the Models list box.

7.

Click Next. Windows installs and configures the modem.

8.

Click Finish to exit.

Содержание MT1932ZDX



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды