manualshive.com logo in svg

Multitech MT1932ZDX, Краткое руководство пользователя

Поделиться
Скачать
Multitech MT1932ZDX Скачать руководство пользователя страница 67

67

Appendix A - Regulatory Information

Canadian Limitations Notice

Notice: The Industry Canada label identifies certificated equipment. This
certification means that the equipment meets certain telecommunications
network protective, operational and safety requirements. The Industry
Canada label does not guarantee the equipment will operate to the user’s
satisfaction.

Before installing this equipment, users should ensure that it is permissible
to be connected to the facilities of the local telecommunications company.
The equipment must also be installed using an acceptable method of
connection. In some cases, the company’s inside wiring associated with a
single line individual service may be extended by means of a certified
connector assembly (telephone extension cord). The customer should be
aware that compliance with the above conditions may not prevent
degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the 

supplier

. Any repairs or alterations

made by the user to this equipment; or equipment malfunctions, may give
the telecommunications company cause to request the user to disconnect
the equipment.

Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water
pipe system, if present, are connected together. This precaution may be
particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves,
but should contact the appropriate electric inspection authority, or electrician,
as appropriate.

The Load Number (

LN

) assigned to each terminal device denotes the

percentage of the total load to be connected to a  telephone  loop which is
used by the device, to prevent overloading. The termination on a loop may
consist of any combination of devices subject only to the requirement that
the total of the Load Numbers of all the devices does not exceed 100. The
Load Number for this product is 3.

This digital apparatus does not exceed the Class B limits for radio noise for
digital apparatus set out in ICES-003 of Industry Canada.

Содержание MT1932ZDX



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды