56
MT1932ZDX Quick Reference Guide
The Modem Dials But Cannot Make a Connection
There can be several reasons the ZDX fails to make a connection.
Possibilities include
•
lack of a physical connection to the telephone line.
•
a wrong dial tone.
•
a busy signal.
•
a wrong number.
•
no modem at the other end.
•
a faulty modem, computer, or software at the other end.
•
incompatibility between modems.
You can narrow the list of possibilities by using extended result codes. To
enable them, enter ATV1X4 and press ENTER while in terminal mode, or
include V1X4 in the modem’s initialization string. When you dial again, the
modem will report the call’s progress.
•
If the modem reports
NO DIALTONE
, check that the modem’s
telephone line cable is connected to both the modem’s LINE jack (not
the PHONE jack) and the telephone wall jack. If the cable looks
secure, try replacing it. If that doesn’t work, the problem may be in
your building’s telephone installation. To test the building installation,
plug a telephone into your modem’s telephone wall jack and listen for
a dial tone. If you hear a dial tone, your modem may be installed
behind a company phone system (PBX).
•
If the modem reports BUSY, the other number may be busy, in which
case you should try again later, or it may indicate that you have failed
to add a 9, prefix to the phone number if you must dial
9
for an outside
line.
If you must dial
9
to get an outside line, the easiest way to dial it
automatically is to include it in the modem’s dial prefix, e.g., ATDT9,.
Note the comma, which inserts a pause before the number is dialed.
By inserting 9, into the dial prefix, you do not have to include it in each
directory entry.
Содержание MT1932ZDX
Страница 1: ...Quick Reference Guide...
