manualshive.com logo in svg

Multitech MT1932ZDX, Краткое руководство пользователя

Поделиться
Скачать
Multitech MT1932ZDX Скачать руководство пользователя страница 59

59

Chapter 5 - Troubleshooting

•

Are you downloading a compressed file with MNP 5 hardware
compression enabled? Since hardware data compression cannot
compress a file already compressed by an archiving  program, the
transfer can be marginally slower with data compression enabled
than with it disabled. (See “When to Disable Data Compression” in
MultiModemZDX Help.)

•

Try entering the L8 (List Online Diagnostics) command in online
mode, making a screen print of the diagnostics listing, and checking
for parameters that may be unacceptable (number of retrains, round
trip delay, etc.).

I Am Losing Data

•

If you are using data compression and a high speed serial port, set the
serial port baud rate to four times the data rate.

•

Your UART may not be reliable at serial port speeds over 9600 bps
or 19,200 bps. Turn off data compression, reset your serial port speed
to a lower rate, or replace your serial port with a faster one.

•

Make sure the flow control method you selected in software matches
the method selected in the modem. If you have a Macintosh, you may
have the wrong cable for hardware flow control.

•

If you are running under Windows 3.1 and have a 16550AFN UART,
you may need to turn on the 16550’s data buffers and/or replace the
Windows serial driver, COMM.DRV. (See “The 16550 UART and
Windows 3.1” in the MultiModemZDX Help file.)

•

Try entering the L8 (List Online Diagnostics) command in online
mode, making a screen print of the diagnostics listing, and checking
for parameters that may be unacceptable (number of retrains, round
trip delay, etc.).

Содержание MT1932ZDX



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды